Beginner's Guide to Installing a New Shower Unit

Beginner's Guide to Installing a New Shower Unit

Blog Article

Book

We've stumbled upon this great article on How to Install a Direct-to-Stud Shower Enclosure directly below on the internet and felt it made good sense to write about it with you on my blog.

A successful shower setup requires cautious planning and a great deal of work. Most of the times, you will certainly require to do three kinds of tasks: framing walls, mounting the plumbing, as well as completing walls.

Prep work

First of all, you need to decide on the sort of shower that you want to mount. It is necessary to establish whether the chosen shower is capable of dealing with specific systems and can regulate a safe level of water with the boiler. Most shower units nowadays are designed to be adaptable to different water pressures (such as saved hot water as well as cold mains).
It is likewise important to take into consideration the water stress and the preparation of the piping as well as drain for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose and also spray parts of the push-on mixer shower device can be linked to the bath tap according to your requirement, and also the water temperature can be readjusted through the taps. Push-on mixers are cheap and extremely easy to set up. Nevertheless, although the tube connection is simple, it is easily dislodged. Furthermore, it is bothersome to change the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this sort of shower are combined with a bathroom mixer tap, and also the temperature can be adjusted with the bath taps. It is a very affordable alternative and no added plumbing is included. Nonetheless, the bath/shower mixers additionally suffer from troublesome temperature level control choices.

Manual Mixer: The hose as well as spray of a manual mixer shower device are a part of the wall surface unit and also the hot and cold water supplies are attached to a solitary shutoff The temperature level and stress of the water are regulated via either one or a range of knobs (in more expensive showers). Although temperature control is a lot easier in manual mixer kinds, they are extra pricey than the formerly mentioned mixers. They also require additional plumbing of cold and hot water system pipes.

Thermostatic Mixer: The hose pipe as well as spray of this shower kind are a part of the wall unit and also the hot and cold water supplies are connected to a single shutoff right here also. It is full with a built-in stabiliser to self-adjust the water temperature as well as to prevent it from becoming too hot. Among the greatest advantages of a thermostatic mixer shower kind includes convenient temperature control. Nonetheless, it is the most costly of the various mixer choices.

Power Shower: A power shower is a single device consisting of an effective electric pump that is capable of modifying both the water stress and temperature. This sort of shower can be fitted if there is water from a cold water cistern and also a hot water cylinder. A power shower makes the change of both pressure and temperature very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a mix central heating boiler under mains pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply as well as it warms the water electrically. It is essential to keep in mind that for this shower kind to be set up, the mains stress needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature level as well as stress to be readjusted using a handle. Designs with temperature stabilisers are much better as they continue to be untouched by various other taps in other places in operation within the family. A significant drawback of electric showers is that the control handle just allows for the alternative of high temperatures at less pressure, or lower temperature levels at a greater stress. This is troublesome in the winter when the spray is frequently weak and also the mains water is colder. Nevertheless, this issue is dealt with in some designs which are available with a winter/summer setting.

Technique

Relying on the type of shower you wish to mount, the shower head have to either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it has to have a check shutoff.
Prior to beginning, it is advisable to mark the settings of the shower head as well as control, as well as to intend the pipe-work entailed. Additionally, the drainage system to remove the waste water will need to be planned. Both placements of the wire path as well as the shower button will likewise require to be considered if an immediate or electrical shower system is being mounted.
Make use of the direction overview supplied with the shower unit to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is essential to remove the water system. In order to secure the pipelines, they must be provided a water resistant covering as well as likewise fitted with isolating shutoffs. The pipes can then be buried right into the wall as well as glued over to neaten the total look.
Fit the base tray, shower head, and also installations.
Link the major shower control to the pipes that will certainly be providing the water (This may call for a women screw string adapter).
Reconnect the water system and also examination the pipes for any type of leaks, as some might require tightening.
If you are setting up an electrical shower, bear in mind to turn off the power supply before making any kind of electric links. Once these links have actually been made (there ought to be assistance within the instruction manual), the power supply can be switched back on.

Changing Water Pressure to Suit Your Shower

The cold water reservoir can be raised to a greater height (often just 150mm (6inches)) by fitting a solid wood support underneath it - possibly made up of struts as well as blockboards. If you choose this choice, the major as well as circulation pipes will certainly also have to be elevated to meet the new height of the reservoir.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it needs to be attached right into the power supply in order to operate.

Piping and also Drainage

It is best to utilize 15mm size supply pipelines, as well as make the go to the shower as brief as well as straight as possible so regarding maintain maximum stress and also reduce heat loss. Furthermore, by reducing the use of elbow joints for pipe corners, you can lower the resistance in the flow of the water. You can achieve this by bending the pipelines instead.

Many Typical Blunders

Violating or disregarding neighborhood code restrictions.

Making use of pipes that are also tiny.

Affixing copper to galvanized without utilizing a brass or dielectric suitable in between both.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your components when mounting them.

Not installing an air void filling up for components.

Cutting supply stub outs as well brief to install the shutoff valves onto after the ended up wall remains in location.

Not correctly straightening tubing right into fittings or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will trigger a leakage.).

When turning the water back on in your home, always run the outdoors hose pipe shutoff or purge your bathrooms to hemorrhage dust and air from the lines. This particles can trigger issues in your sink faucets and also other plumbing trim.

The best type of shower enclosure

South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.

When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.

Are you confused?

You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.

If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.

Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.

As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.

Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.

South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

https://southindiaagencies.com/blog/best-type-of-shower-enclosure/

I hope you enjoyed reading our post about How to Install a Shower Enclosure . Thank you so much for taking time to read our piece of content. Sharing is good. You never know, you might be doing someone a favor. I truly appreciate reading our article about How to Install a One-Piece Shower Unit.

Request An Appointment

Report this page